» home Audio spectrum correction - Tube Mastering EQ
EQ News, venues and events Contact us
previous page

The MEQ-1 equalizer design is simple and refined at the same time, it may offer an uncommon resolution over the entire audio range, with an unobtrusive and natural action,

operating with the real frequencies contained in the original musical message, with no artifacts introduction.

An all valve-based equipment entirely hand-crafted.

The components used are all selected with the strictest tolerance, and tested by ear.

MEQ-1 Mastering equalizer MEQ-1

Twin channel 4-band equalizer
LC passive filters with active buffer
All valve-based circuitry
Filtered and stabilized power supply
Input, output, boost, attenuation, bandwidth controls
Fixed frequency selections allowing total recall
Continuous rotary controls
Transformer-balanced audio signal route
Linear frequency response over the entire audio range and beyond

Technical data Download the brochure

Frequency response: 15Hz—45KHz +0.5/-3dB
C.M.R.R.:   ›60dB
S/N ratio at 20dB 22Hz/22KHz 600-ohm terminated: ›80dBu
Maximum output level for 1% THD+Noise: +18.5dBm
Input and output impedance: 600 ohms